Overview
You can set up your personally-owned mobile device (phone, tablet, etc.) to print to any of the networked printers/multi-functional devices across campus, after an initial set-up process. To print from your device, you will need to connect it to the Eduroam network and then install an app. After this initial set-up, you can use the print option from any application and send your print job to the printing queue. Then proceed to any of the College's network printers, scan your badge, and select the file(s) you want to print.
How to
Install the printing app on your device
1. Make sure your device is connected to the Eduroam network.
2. Go to http://prd-papercut03.fandm.edu:9163/setup for the downloadable printing app file.
Note: Your operating system should automatically be detected, and it will prompt you to Download the appropriate set up for your operating system.
3. Tap Download to download this PaperCut Mobility Print profile.
4. Follow the instructions as displayed on your device to install the profile.
- Open Settings.
- Tap Profile>Downloaded>Install>Install OR Tap General>Profile>PaperCut Mobility Print>Install
- Tap Done, if prompted
5. This completes the installation process. You can now send a document to the printer.
Send a document to the printer
After you install the PaperCut Mobility Print profile, as described above, you can print from your device to a network printer. Print, as you would normally send a file to the printer, and select the destination printer as Toshiba-Papercut.
For more about printing, refer to the Print with Papercut knowledge article.
The Help Desk
Need more help? Contact us!
- Enter a Service Request here using the links on this page to route your request to the right expert.
- Call the Help Desk at 717-358-6789.
- Stop by and see us in Martin Science Library.